Description - Our Premium soft carpet trade show kits are the most durable kits we offer. These tiles were designed to withstand the toughes environments, espcially the constant foot traffic associated with trade shows. These carpet tile kits are available in three packs. The first pack features 25 tiles, our second pack features 25 tiles with a carry tote and our last pack features 25 tiles with a wheeled case. Each kit covers a 10' x 10' area. Each soft tile comes with two removable edge pieces and each tile can be easily installed and removed. Purchase multiple kits to cover larger booth areas.
Material – 3M Scotchguard coated polyester fibers (over 2 million per square meter) needle punched into closed cell EVA foam rubber for unmatched durability.
Size – 2' x 2'.
Thickness – 5/8 Inch nominal (~14mm)
Weight – Tiles weigh approximately 1.70 Lbs. each.
Recommended Uses – Premium soft carpet trade show kits are the best flooring option for any trade show or display booth. These soft tiles are also great for home offices, spare bedrooms, day cares and much more.
In Stock - Ships between Apr 8 - 10
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.